Arista

Humidity and Air Conditioning Problems (Bad Hair Days & More)

Humidity and air conditioning problems

Humidity and air conditioning problems cause more than bad hair days

July in New York City can feel like we’re living in the tropics. If your air conditioner is not doing a great job getting rid of the humidity, it can have all kinds of nasty consequences beyond uncooperative hair and sticky skin. Here’s how humidity can hurt you, and ways to banish humidity and air conditioning problems.

What you don’t know about humidity and air conditioning can hurt you

According to Green Building Advisor, humidity and air conditioning are directly related to air quality.

Business owners, as well as their employees and customers, are concerned about air quality because it can dramatically our health, comfort, and ability to function at our best.

Here’s something you may not know: too little humidity can be as damaging as too much.

When the air has TOO MUCH humidity:

When the air has TOO LITTLE humidity:

4 ways to fix humidity and air conditioning problems

Humidity and air conditioning problems go hand in hand. In most cases, your uncontrolled humidity problems can be fixed by a properly designed and maintained HVAC system.

1. Get the right sized air conditioner

If your air conditioner is doing a poor job of removing the humidity in your space, it may be too big for your space. Back in the day, installers often made the mistake of assuming “bigger is better.” Unfortunately, that’s turned out to be a mistake. Oversized air conditioning units don’t provide consistent cooling. They also use more energy.

Oversized air conditioners turn on and off repeatedly and run in short bursts. So they never run long enough to effectively remove humidity. Believe it or not, you might need to downsize your unit to improve comfort and health.

Expert commercial HVAC companies will perform a load analysis to calculate the correct capacity for your heating and cooling equipment. This service takes many factors into account, including the square footage of your space, design elements, energy-efficiency features, building occupancy patterns and how the space is used. Most quality HVAC service providers use a software tool to do this calculation.

Learn more: New York HVC Systems: 8 Reasons Bigger Is Not Always Better.

2. Update your system design

As building uses and occupants change, space may be reconfigured in ways that decrease the effectiveness of the HVAC system. This is especially true of large open office spaces with cubicles. A qualified HVAC contractor can perform an analysis of your equipment and ventilation system using ASHRAE guidelines. Minor design changes can make a big difference in air quality and comfort levels.

Learn more: 4 Reasons You Need HVAC System Design For Your Air Conditioning Install.

3. Add humidity control devices

Dehumidifiers can help to control excess humidity in damp areas such as basements. To add more humidity to your space if it’s too low, you can install central humidification systems that work with your air conditioner.

A central humidifier is attached to your heating and air conditioning unit and plumbing. The humidifier unit uses a device similar to a thermostat (called a humidistat) to monitor the humidity levels in the air. The ideal humidity level for comfort is between 35 and 50 percent. When the air is too dry, the humidifier adds moisture in the form of water vapor to the air circulated by your HVAC system.

So, unlike standalone humidifiers that can only work in one room, these permanent installations humidify the entire space at once. That makes them extremely efficient. Not only that, but you never need to worry about safety or having an ugly unit in the middle of your conference room. The equipment is completely out of sight.

4. Don’t neglect maintenance to prevent humidity and air conditioning issues

According to the Occupational Safety and Health Association (OSHA), some of the most common causes of poor indoor air quality include high humidity and poor upkeep of ventilation, heating and air conditioning systems.

Particularly in the spring and fall when air conditioners and heaters are turned on and off, your systems need to be cleaned and serviced. Regular maintenance keeps them working as designed and properly controlling humidity. Filters and belts need to be cleaned or replaced, condenser and evaporator coils need to be cleaned, parts need to be lubricated, and electrical connections tested. Clearing any standing water, checking air flow, testing humidity levels, checking refrigerant levels and checking for leaks will keep your system working well and prevent air quality issues.

It’s critical to have regular inspections and preventative maintenance done by an expert to keep your system in good working order. The most convenient and cost-effective way to do this is by signing up for a yearly maintenance agreement. To learn more, take a look at our free guide.

Exit mobile version